Thread: Help with Hauppauge USB-Live2 capture
i'm using natty 64-bit , i'm trying usb-live2 capture device work. i've searched around can't find works. here's info after plug in device.
devices /dev/video1 , /dev/vbi0 created, not removed when device unplugged.
none of indicator lights on. in windows, blue light comes on when plugged in , green light comes on when capturing.
lsusb
dmesgcode:bus 002 device 005: id 2040:c200 hauppauge
i've tried accessing device using vlc, mplayer/mencoder, tvtime, kdenlive, , guvcview. vlc says can't access /dev/video1, mplayer shows green screen , says "v4l2: select timeout", kdenlive hangs @ "initializing" , guvcview shows black screen. i'm stumped, ideas?code:[ 527.450166] usb 2-2: new high speed usb device using ehci_hcd , address 5 [ 527.684892] ir nec protocol handler initialized [ 527.687105] ir rc5(x) protocol handler initialized [ 527.689167] ir rc6 protocol handler initialized [ 527.691502] ir jvc protocol handler initialized [ 527.693657] ir sony protocol handler initialized [ 527.697092] lirc_dev: ir remote control driver registered, major 250 [ 527.699718] ir lirc bridge handler initialized [ 527.718812] cx231xx v4l2 driver loaded. [ 527.718873] cx231xx #0: new device hauppauge hauppauge device @ 480 mbps (2040:c200) 5 interfaces [ 527.718876] cx231xx #0: registering interface 1 [ 527.729811] cx231xx #0: can't change interface 3 alt no. 3: max. pkt size = 0 [ 527.739067] cx231xx #0: can't change interface 4 alt no. 1: max. pkt size = 0 [ 527.740181] cx231xx #0: identified hauppauge usb live 2 (card=9) [ 527.849888] cx231xx #0: cx231xx_dif_set_standard: setstandard ffffffff [ 527.859014] cx231xx #0: changing i2c master port 3 [ 527.875187] cx25840 15-0044: cx23102 a/v decoder found @ 0x88 (cx231xx #0) [ 527.894040] cx25840 15-0044: firmware download size changed 16 bytes max length [ 529.942897] cx25840 15-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes) [ 529.978644] cx231xx #0: cx231xx #0: v4l2 driver version 0.0.1 [ 530.007767] cx231xx #0: cx231xx_dif_set_standard: setstandard ffffffff [ 530.056392] cx231xx #0: video_mux : 0 [ 530.056398] cx231xx #0: do_mode_ctrl_overrides : 0xb000 [ 530.057261] cx231xx #0: do_mode_ctrl_overrides ntsc [ 530.064934] cx231xx #0: cx231xx #0/0: registered device video1 [v4l2] [ 530.064993] cx231xx #0: cx231xx #0/0: registered device vbi0 [ 530.064997] cx231xx #0: v4l2 device registered video1 , vbi0 [ 530.065004] cx231xx #0: endpoint addr 0x84, alternate settings: 5 [ 530.065008] cx231xx #0: alternate setting 0, max size= 512 [ 530.065011] cx231xx #0: alternate setting 1, max size= 184 [ 530.065014] cx231xx #0: alternate setting 2, max size= 728 [ 530.065018] cx231xx #0: alternate setting 3, max size= 2892 [ 530.065021] cx231xx #0: alternate setting 4, max size= 1800 [ 530.065025] cx231xx #0: endpoint addr 0x85, alternate settings: 2 [ 530.065029] cx231xx #0: alternate setting 0, max size= 512 [ 530.065033] cx231xx #0: alternate setting 1, max size= 512 [ 530.065037] cx231xx #0: endpoint addr 0x86, alternate settings: 2 [ 530.065041] cx231xx #0: alternate setting 0, max size= 512 [ 530.065044] cx231xx #0: alternate setting 1, max size= 576 [ 530.066389] usbcore: registered new interface driver cx231xx [ 530.071318] cx231xx #0: cx231xx_stop_stream():: ep_mask = 8 [ 530.072166] cx231xx #0: cx231xx-audio.c: probing cx231xx non standard usbaudio [ 530.073502] cx231xx #0: setpowermode::mode = 48, no change req. [ 530.074612] cx231xx #0: endpoint addr 0x83, alternate settings: 3 [ 530.074617] cx231xx #0: alternate setting 0, max size= 512 [ 530.074621] cx231xx #0: alternate setting 1, max size= 28 [ 530.074624] cx231xx #0: alternate setting 2, max size= 52 [ 530.074628] cx231xx: cx231xx audio extension initialized [ 530.075250] cx231xx #0: cx231xx_stop_stream():: ep_mask = 8 [ 530.129963] cx231xx #0: cx231xx_start_stream():: ep_mask = 4 [ 530.134212] cx231xx #0: cx231xx_stop_stream():: ep_mask = 4 [ 530.142293] cx231xx #0: can't change interface 2 alt no. 0 (err=-71) [ 530.142299] cx231xx #0: failed set alternate setting ! [ 530.146541] cx231xx #0: can't change interface 2 alt no. 1 (err=-71) [ 530.146546] cx231xx #0: failed set alternate setting ! [ 530.151041] cx231xx #0: can't change interface 2 alt no. 1 (err=-71) [ 530.151046] cx231xx #0: failed set alternate setting ! [ 530.174539] cx231xx #0: can't change interface 2 alt no. 1 (err=-71) [ 530.174544] cx231xx #0: failed set alternate setting ! [ 530.178784] cx231xx #0: can't change interface 2 alt no. 1 (err=-71) [ 530.178787] cx231xx #0: failed set alternate setting !
sorry, don't think works current version of ubuntu, it's being worked on (see last comments in following link, http://www.kernellabs.com/blog/?p=1445).
if want work can try ubuntu 10.04, apparently works people. haven't tried ubuntu 10.04.
Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Multimedia Software [SOLVED] Help with Hauppauge USB-Live2 capture
Ubuntu
Comments
Post a Comment