Thread: Read data from USB port
hi all,
have got new usb device (ventus w831 weather station) data from. have used program weather display no luck, , want see if can data stream usb port.
when plugin usb cable, files /dev/hidraw0 , /dev/usb/hiddev0 appears. have tried use "sudo cat /dev/hidraw0" (for both files), no output.
running 9.10, have tried briefly in live 11.04 - without luck.
output of lsusb follows:
bus 005 device 001: id 1d6b:0001 linux foundation 1.1 root hub
bus 006 device 002: id 0a5c:2101 broadcom corp. a-link blueusba2 bluetooth
bus 006 device 001: id 1d6b:0001 linux foundation 1.1 root hub
bus 004 device 002: id 08ff:2580 authentec, inc. aes2501 fingerprint sensor
bus 004 device 001: id 1d6b:0001 linux foundation 1.1 root hub
bus 003 device 001: id 1d6b:0001 linux foundation 1.1 root hub
bus 007 device 003: id 1130:6801 tenx technology, inc.
bus 007 device 001: id 1d6b:0001 linux foundation 1.1 root hub
bus 001 device 004: id 04f2:b013 chicony electronics co., ltd usb 2.0 camera
bus 001 device 001: id 1d6b:0002 linux foundation 2.0 root hub
bus 002 device 001: id 1d6b:0002 linux foundation 2.0 root hub
far can tell, tenx technology, inc. weather station. last few lines of dmesg:
[17046.449181] usb 7-1: usb disconnect, address 2
[17046.451226] hidraw device minor 0 doesn't exist
[17049.032099] usb 7-1: new low speed usb device using uhci_hcd , address 3
[17049.197451] usb 7-1: configuration #1 chosen 1 choice
[17049.213544] generic-usb 0003:1130:6801.0003: hiddev96,hidraw0: usb hid v1.10 device [ ] on usb-0000:00:1d.2-1/input0
appreciated!
Forum The Ubuntu Forum Community Ubuntu Official Flavours Support General Help [ubuntu] Read data from USB port
Ubuntu
Comments
Post a Comment