Thread: A bit of a head scratcher
i've been having strange wireless issue lately. have installed usb wireless network adapter (lg-nortel) using ndiswrapper on xbmc live machine.
problem when boot doesnt have connection network. when go wicd-curses investigate wireless network never found. router closeby , reliable (never had issue on laptop). ndiswrapper -l shows usb device present , working ok.
if boot , connection perfect hours if connection drops not come back.
guess there 70% chance when boot have connection network.
discovered delights of ftp , telnet when turn on pc , forward connecting remotely find never got on network in first place not nice!
ideas?
dont think should matter usb device connected 1 meter usb extension (i tested without , different ports same consequences).
time.
here working connection :
lspcilsusbcode:00:00.0 host bridge: intel corporation n10 family dmi bridge (rev 02) 00:1b.0 audio device: intel corporation n10/ich 7 family high definition audio controller (rev 02) 00:1c.0 pci bridge: intel corporation n10/ich 7 family pci express port 1 (rev 02) 00:1c.1 pci bridge: intel corporation n10/ich 7 family pci express port 2 (rev 02) 00:1c.3 pci bridge: intel corporation n10/ich 7 family pci express port 4 (rev 02) 00:1d.0 usb controller: intel corporation n10/ich7 family usb uhci controller #1 (rev 02) 00:1d.1 usb controller: intel corporation n10/ich 7 family usb uhci controller #2 (rev 02) 00:1d.2 usb controller: intel corporation n10/ich 7 family usb uhci controller #3 (rev 02) 00:1d.3 usb controller: intel corporation n10/ich 7 family usb uhci controller #4 (rev 02) 00:1d.7 usb controller: intel corporation n10/ich 7 family usb2 ehci controller (rev 02) 00:1e.0 pci bridge: intel corporation 82801 mobile pci bridge (rev e2) 00:1f.0 isa bridge: intel corporation nm10 family lpc controller (rev 02) 00:1f.2 ide interface: intel corporation n10/ich7 family sata ide controller (rev 02) 00:1f.3 smbus: intel corporation n10/ich 7 family smbus controller (rev 02) 01:00.0 vga compatible controller: nvidia corporation device 0a6f (rev a2) 01:00.1 audio device: nvidia corporation high definition audio controller (rev a1) 02:00.0 system peripheral: jmicron technology corp. sd/mmc host controller (rev 80) 02:00.2 sd host controller: jmicron technology corp. standard sd host controller (rev 80) 02:00.3 system peripheral: jmicron technology corp. ms host controller (rev 80) 02:00.5 ethernet controller: jmicron technology corp. jmc260 pci express fast ethernet controller (rev 02) 03:00.0 network controller: realtek semiconductor co., ltd. device 8171 (rev 10)ifconfigcode:bus 005 device 002: id 045e:006d microsoft corp. ehome remote control keyboard keys bus 005 device 001: id 1d6b:0001 linux foundation 1.1 root hub bus 004 device 001: id 1d6b:0001 linux foundation 1.1 root hub bus 003 device 002: id 05a4:1000 ortek technology, inc. bus 003 device 001: id 1d6b:0001 linux foundation 1.1 root hub bus 002 device 001: id 1d6b:0001 linux foundation 1.1 root hub bus 001 device 004: id 1058:1021 western digital technologies, inc. bus 001 device 002: id 157e:300e trendnet bus 001 device 001: id 1d6b:0002 linux foundation 2.0 root hub
iwconfigcode:eth0 link encap:ethernet hwaddr 80:ee:73:07:8b:07 broadcast running multicast mtu:1500 metric:1 rx packets:0 errors:0 dropped:0 overruns:0 frame:0 tx packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 rx bytes:0 (0.0 b) tx bytes:0 (0.0 b) interrupt:27 lo link encap:local loopback inet addr:127.0.0.1 mask:255.0.0.0 inet6 addr: ::1/128 scope:host loopback running mtu:16436 metric:1 rx packets:8 errors:0 dropped:0 overruns:0 frame:0 tx packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 rx bytes:480 (480.0 b) tx bytes:480 (480.0 b) wlan0 link encap:ethernet hwaddr 00:13:f7:ca:80:51 inet addr:192.168.1.103 bcast:192.168.1.255 mask:255.255.255.0 inet6 addr: fe80::213:f7ff:feca:8051/64 scope:link broadcast running multicast mtu:1500 metric:1 rx packets:22693 errors:0 dropped:0 overruns:0 frame:0 tx packets:1335 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 rx bytes:7882610 (7.8 mb) tx bytes:230026 (230.0 kb)
lsmodcode:wlan0 ralink sta essid:"cliff house" nickname:"rt2870sta" mode:managed frequency=2.462 ghz access point: 00:22:6b:f7:a0:48 bit rate=54 mb/s rts thr:off fragment thr:off link quality=100/100 signal level:-56 dbm noise level:-71 dbm rx invalid nwid:0 rx invalid crypt:0 rx invalid frag:0 tx excessive retries:0 invalid misc:0 missed beacon:0
dmesgcode:module size used dm_crypt 11331 0 snd_hda_codec_nvhdmi 12722 1 snd_hda_codec_idt 54083 1 rt2800usb 7220 0 rt2800lib 28358 1 rt2800usb rt2x00usb 9662 2 rt2800usb,rt2800lib rt2x00lib 26746 2 rt2800lib,rt2x00usb compat_firmware_class 6554 1 rt2x00lib mac80211 232535 2 rt2x00usb,rt2x00lib snd_hda_intel 20799 3 snd_hda_codec 87096 3 snd_hda_codec_nvhdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 5668 1 snd_hda_codec snd_pcm_oss 34603 0 snd_mixer_oss 13929 1 snd_pcm_oss snd_pcm 71646 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_dummy 1498 0 snd_seq_oss 27626 0 snd_seq_midi 4621 0 snd_rawmidi 19141 1 snd_seq_midi ndiswrapper 184677 0 snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi cfg80211 146764 2 rt2x00lib,mac80211 snd_seq 48042 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event rt2870sta 399316 1 snd_timer 18710 3 snd_pcm,snd_seq snd_seq_device 6052 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq usbhid 36110 0 lp 7028 0 snd 56687 19 snd_hda_codec_nvhdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq,snd_timer,snd_seq_device jmb38x_ms 7311 0 crc_ccitt 1339 2 rt2800usb,rt2870sta hid 67032 1 usbhid psmouse 63245 0 serio_raw 3978 0 parport 32635 1 lp nvidia 9961216 37 vga16fb 11385 0 memstick 8237 1 jmb38x_ms sdhci_pci 5470 0 sdhci 15462 1 sdhci_pci led_class 2864 2 rt2x00lib,sdhci jme 27953 0 mii 4381 1 jme soundcore 6620 1 snd snd_page_alloc 7140 2 snd_hda_intel,snd_pcm vgastate 8961 1 vga16fb lirc_mceusb 12402 1 lirc_dev 8884 3 lirc_mceusb usb_storage 39553 1 vesafb 3542 0 intel_agp 24375 0 fbcon 35102 71 tileblit 2031 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon softcursor 1189 1 bitblit video 17375 0 output 1871 1 video agpgart 31724 2 nvidia,intel_agp ramzswap 6362 1 xvmalloc 4074 1 ramzswap lzo_decompress 2189 1 ramzswap lzo_compress 1853 1 ramzswap
iwlist scancode:[ 0.000000] initializing cgroup subsys cpuset [ 0.000000] initializing cgroup subsys cpu [ 0.000000] linux version 2.6.32-26-generic (buildd@rothera) (gcc version 4.4.3 (ubuntu 4.4.3-4ubuntu5) ) #48-ubuntu smp wed nov 24 09:00:03 utc 2010 (ubuntu 2.6.32-26.48-generic 2.6.32.24+drm33.11) [ 0.000000] kernel supported cpus: [ 0.000000] intel genuineintel [ 0.000000] amd authenticamd [ 0.000000] nsc geode nsc [ 0.000000] cyrix cyrixinstead [ 0.000000] centaur centaurhauls [ 0.000000] transmeta genuinetmx86 [ 0.000000] transmeta transmetacpu [ 0.000000] umc umc umc umc [ 0.000000] bios-provided physical ram map: [ 0.000000] bios-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] bios-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] bios-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] bios-e820: 0000000000100000 - 000000007ffb0000 (usable) [ 0.000000] bios-e820: 000000007ffb0000 - 000000007ffbe000 (acpi data) [ 0.000000] bios-e820: 000000007ffbe000 - 000000007fff0000 (acpi nvs) [ 0.000000] bios-e820: 000000007fff0000 - 0000000080000000 (reserved) [ 0.000000] bios-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] bios-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] dmi present. [ 0.000000] ami bios detected: bios may corrupt low ram, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7ffb0 max_arch_pfn = 0x100000 [ 0.000000] mtrr default type: uncachable [ 0.000000] mtrr fixed ranges enabled: [ 0.000000] 00000-9ffff write-back [ 0.000000] a0000-bffff uncachable [ 0.000000] c0000-cffff write-protect [ 0.000000] d0000-dffff uncachable [ 0.000000] e0000-effff write-through [ 0.000000] f0000-fffff write-protect [ 0.000000] mtrr variable ranges enabled: [ 0.000000] 0 base 000000000 mask f80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 pat enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] scanning 0 areas low memory corruption [ 0.000000] modified physical ram map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007ffb0000 (usable) [ 0.000000] modified: 000000007ffb0000 - 000000007ffbe000 (acpi data) [ 0.000000] modified: 000000007ffbe000 - 000000007fff0000 (acpi nvs) [ 0.000000] modified: 000000007fff0000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] using x86 segment limits approximate nx protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2m [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables 377fe000 @ 10000-15000 [ 0.000000] ramdisk: 371d5000 - 37fef641 [ 0.000000] allocated new ramdisk: 008e1000 - 016fb641 [ 0.000000] move ramdisk 00000000371d5000 - 0000000037fef640 008e1000 - 016fb640 [ 0.000000] acpi: rsdp 000f9eb0 00024 (v02 acpiam) [ 0.000000] acpi: xsdt 7ffb0100 00054 (v01 shuttl shuttle 20100728 msft 00000097) [ 0.000000] acpi: facp 7ffb0290 000f4 (v04 072810 facp1536 20100728 msft 00000097) [ 0.000000] acpi: dsdt 7ffb05c0 06645 (v02 xs350 xs35v10 00000000 intl 20051117) [ 0.000000] acpi: facs 7ffbe000 00040 [ 0.000000] acpi: apic 7ffb0390 0006c (v02 072810 apic1536 20100728 msft 00000097) [ 0.000000] acpi: mcfg 7ffb0400 0003c (v01 072810 oemmcfg 20100728 msft 00000097) [ 0.000000] acpi: slic 7ffb0440 00176 (v01 shuttl shuttle 20100728 msft 00000097) [ 0.000000] acpi: oemb 7ffbe040 00072 (v01 072810 oemb1536 20100728 msft 00000097) [ 0.000000] acpi: hpet 7ffba5c0 00038 (v01 072810 oemhpet 20100728 msft 00000097) [ 0.000000] acpi: local apic address 0xfee00000 [ 0.000000] 1159mb highmem available. [ 0.000000] 887mb lowmem available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] bios data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] ex trampoline ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] trampoline ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dced8] text data bss ==> [0000100000 - 00008dced8] [ 0.000000] #4 [000009fc00 - 0000100000] bios reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008dd000 - 00008e01ab] brk ==> [00008dd000 - 00008e01ab] [ 0.000000] #6 [0000010000 - 0000011000] pgtable ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008e1000 - 00016fb641] new ramdisk ==> [00008e1000 - 00016fb641] [ 0.000000] #8 [0000011000 - 0000018000] bootmap ==> [0000011000 - 0000018000] [ 0.000000] found smp mp-table @ [c00ff780] ff780 [ 0.000000] zone pfn ranges: [ 0.000000] dma 0x00000010 -> 0x00001000 [ 0.000000] normal 0x00001000 -> 0x000377fe [ 0.000000] highmem 0x000377fe -> 0x0007ffb0 [ 0.000000] movable zone start pfn each node [ 0.000000] early_node_map[2] active pfn ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffb0 [ 0.000000] on node 0 totalpages: 524095 [ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c16fd200 [ 0.000000] dma zone: 32 pages used memmap [ 0.000000] dma zone: 0 pages reserved [ 0.000000] dma zone: 3951 pages, lifo batch:0 [ 0.000000] normal zone: 1744 pages used memmap [ 0.000000] normal zone: 221486 pages, lifo batch:31 [ 0.000000] highmem zone: 2320 pages used memmap [ 0.000000] highmem zone: 294562 pages, lifo batch:31 [ 0.000000] using apic driver default [ 0.000000] acpi: pm-timer io port: 0x808 [ 0.000000] acpi: local apic address 0xfee00000 [ 0.000000] acpi: lapic (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] acpi: lapic (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] acpi: lapic (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] acpi: lapic (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] acpi: ioapic (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] ioapic[0]: apic_id 4, version 32, address 0xfec00000, gsi 0-23 [ 0.000000] acpi: int_src_ovr (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] acpi: int_src_ovr (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] acpi: irq0 used override. [ 0.000000] acpi: irq2 used override. [ 0.000000] acpi: irq9 used override. [ 0.000000] using acpi (madt) smp configuration information [ 0.000000] acpi: hpet id: 0xffffffff base: 0xfed00000 [ 0.000000] smp: allowing 4 cpus, 0 hotplug cpus [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] pm: registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] pm: registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] pm: registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] allocating pci resources starting @ 80000000 (gap: 80000000:7ee00000) [ 0.000000] booting paravirtualized kernel on bare hardware [ 0.000000] nr_cpus:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: embedded 14 pages/cpu @c2800000 s36056 r0 d21288 u1048576 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] built 1 zonelists in zone order, mobility grouping on. total pages: 519999 [ 0.000000] kernel command line: boot_image=/boot/vmlinuz-2.6.32-26-generic root=uuid=5f9e13ad-a33a-4057-8b66-9e0e218e4784 ro quiet splash xbmc=autostart,nodiskmount loglevel=0 video=vesafb [ 0.000000] pid hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] enabling fast fpu save , restore... done. [ 0.000000] enabling unmasked simd fpu exception support... done. [ 0.000000] initializing cpu#0 [ 0.000000] allocated 10483840 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if don't want memory cgroups [ 0.000000] initializing highmem node 0 (000377fe:0007ffb0) [ 0.000000] memory: 2044956k/2096832k available (4682k kernel code, 50220k reserved, 2121k data, 656k init, 1187528k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kb) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kb) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 mb) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 mb) [ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kb) [ 0.000000] .data : 0xc0592847 - 0xc07a4e68 (2121 kb) [ 0.000000] .text : 0xc0100000 - 0xc0592847 (4682 kb) [ 0.000000] checking if processor honours wp bit in supervisor mode...ok. [ 0.000000] slub: genslabs=13, hwalign=64, order=0-3, minobjects=0, cpus=4, nodes=1 [ 0.000000] hierarchical rcu implementation. [ 0.000000] nr_irqs:2304 nr_irqs:440 [ 0.000000] extended cmos year: 2000 [ 0.000000] console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] hpet: 3 timers in total, 0 timers used per-cpu timer [ 0.000000] fast tsc calibration using pit [ 0.000000] detected 1662.491 mhz processor. [ 0.004009] calibrating delay loop (skipped), value calculated using timer frequency.. 3324.98 bogomips (lpj=6649964) [ 0.004044] security framework initialized [ 0.004084] apparmor: apparmor initialized [ 0.004100] mount-cache hash table entries: 512 [ 0.004330] initializing cgroup subsys ns [ 0.004340] initializing cgroup subsys cpuacct [ 0.004350] initializing cgroup subsys memory [ 0.004364] initializing cgroup subsys devices [ 0.004370] initializing cgroup subsys freezer [ 0.004376] initializing cgroup subsys net_cls [ 0.004411] cpu: l1 cache: 32k, l1 d cache: 24k [ 0.004418] cpu: l2 cache: 512k [ 0.004423] cpu: physical processor id: 0 [ 0.004428] cpu: processor core id: 0 [ 0.004435] mce: cpu supports 5 mce banks [ 0.004448] cpu0: thermal monitoring enabled (tm1) [ 0.004456] using mwait in idle threads. [ 0.004467] performance events: atom events, intel pmu driver. [ 0.004484] ... version: 3 [ 0.004488] ... bit width: 40 [ 0.004492] ... generic registers: 2 [ 0.004497] ... value mask: 000000ffffffffff [ 0.004502] ... max period: 000000007fffffff [ 0.004507] ... fixed-purpose events: 3 [ 0.004511] ... event mask: 0000000700000003 [ 0.004520] checking 'hlt' instruction... ok. [ 0.020007] disabling 4mb page tables avoid tlb bug [ 0.024197] acpi: core revision 20090903 [ 0.040017] ftrace: converting mcount calls 0f 1f 44 00 00 [ 0.040028] ftrace: allocating 21794 entries in 43 pages [ 0.044103] enabling apic mode: flat. using 1 i/o apics [ 0.044434] ..timer: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.085438] cpu0: intel(r) atom(tm) cpu d510 @ 1.66ghz stepping 0a [ 0.088001] booting processor 1 apic 0x2 ip 0x6000 [ 0.008000] initializing cpu#1 [ 0.008000] cpu: l1 cache: 32k, l1 d cache: 24k [ 0.008000] cpu: l2 cache: 512k [ 0.008000] cpu: physical processor id: 0 [ 0.008000] cpu: processor core id: 1 [ 0.008000] cpu1: thermal monitoring enabled (tm1) [ 0.172071] cpu1: intel(r) atom(tm) cpu d510 @ 1.66ghz stepping 0a [ 0.172093] checking tsc synchronization [cpu#0 -> cpu#1]: [ 0.176001] measured 10 cycles tsc warp between cpus, turning off tsc clock. [ 0.176001] marking tsc unstable due check_tsc_sync_source failed [ 0.176187] booting processor 2 apic 0x1 ip 0x6000 [ 0.008000] initializing cpu#2 [ 0.008000] cpu: l1 cache: 32k, l1 d cache: 24k [ 0.008000] cpu: l2 cache: 512k [ 0.008000] cpu: physical processor id: 0 [ 0.008000] cpu: processor core id: 0 [ 0.008000] cpu2: thermal monitoring enabled (tm1) [ 0.264108] cpu2: intel(r) atom(tm) cpu d510 @ 1.66ghz stepping 0a [ 0.264351] booting processor 3 apic 0x3 ip 0x6000 [ 0.008000] initializing cpu#3 [ 0.008000] cpu: l1 cache: 32k, l1 d cache: 24k [ 0.008000] cpu: l2 cache: 512k [ 0.008000] cpu: physical processor id: 0 [ 0.008000] cpu: processor core id: 1 [ 0.008000] cpu3: thermal monitoring enabled (tm1) [ 0.352133] cpu3: intel(r) atom(tm) cpu d510 @ 1.66ghz stepping 0a [ 0.352184] brought 4 cpus [ 0.352191] total of 4 processors activated (13196.51 bogomips). [ 0.353578] cpu0 attaching sched-domain: [ 0.353587] domain 0: span 0,2 level sibling [ 0.353593] groups: 0 (cpu_power = 589) 2 (cpu_power = 589) [ 0.353606] domain 1: span 0,2 level mc [ 0.353611] groups: 0,2 (cpu_power = 1178) [ 0.353620] domain 2: span 0-3 level cpu [ 0.353625] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 0.353641] cpu1 attaching sched-domain: [ 0.353646] domain 0: span 1,3 level sibling [ 0.353651] groups: 1 (cpu_power = 589) 3 (cpu_power = 589) [ 0.353663] domain 1: span 1,3 level mc [ 0.353668] groups: 1,3 (cpu_power = 1178) [ 0.353677] domain 2: span 0-3 level cpu [ 0.353682] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 0.353695] cpu2 attaching sched-domain: [ 0.353700] domain 0: span 0,2 level sibling [ 0.353705] groups: 2 (cpu_power = 589) 0 (cpu_power = 589) [ 0.353716] domain 1: span 0,2 level mc [ 0.353721] groups: 0,2 (cpu_power = 1178) [ 0.353730] domain 2: span 0-3 level cpu [ 0.353735] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 0.353748] cpu3 attaching sched-domain: [ 0.353753] domain 0: span 1,3 level sibling [ 0.353758] groups: 3 (cpu_power = 589) 1 (cpu_power = 589) [ 0.353770] domain 1: span 1,3 level mc [ 0.353775] groups: 1,3 (cpu_power = 1178) [ 0.353784] domain 2: span 0-3 level cpu [ 0.353788] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 0.354145] devtmpfs: initialized [ 0.354145] regulator: core version 0.5 [ 0.354145] time: 17:39:27 date: 06/30/11 [ 0.354145] net: registered protocol family 16 [ 0.354145] trying unpack rootfs image initramfs... [ 0.354145] eisa bus registered [ 0.354145] acpi: bus type pci registered [ 0.354145] pci: mcfg configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.354145] pci: not using mmconfig. [ 0.356081] pci: pci bios revision 3.00 entry @ 0xf0031, last bus=4 [ 0.356086] pci: using configuration type 1 base access [ 0.357916] bio: create slab <bio-0> @ 0 [ 0.357916] acpi: ec: ec in dsdt [ 0.362105] acpi error: no handler region [ecrm] (f70119d8) [embeddedcontrol] (20090903/evregion-319) [ 0.362120] acpi error: region embeddedcontrol(3) has no handler (20090903/exfldio-295) [ 0.362133] acpi error (psparse-0537): method parse/execution failed [\_sb_.pci0.sbrg.ec0_._reg] (node f7015390), ae_not_exist [ 0.362891] acpi: executed 1 blocks of module-level executable aml code [ 0.372083] acpi: ec: gpe storm detected, transactions use polling mode [ 0.840100] acpi: interpreter enabled [ 0.840110] acpi: (supports s0 s3 s4 s5) [ 0.840156] acpi: using ioapic interrupt routing [ 0.840248] pci: mcfg configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.843421] pci: mcfg area @ e0000000 reserved in acpi motherboard resources [ 0.843428] pci: using mmconfig extended config space [ 0.855995] acpi: ec: gpe = 0x1d, i/o: command/status = 0x66, data = 0x62 [ 0.856413] acpi: no dock devices found. [ 0.856720] acpi: pci root bridge [pci0] (0000:00) [ 0.856894] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfcffc000-0xfcffffff] [ 0.856943] pci 0000:00:1b.0: pme# supported d0 d3hot d3cold [ 0.856951] pci 0000:00:1b.0: pme# disabled [ 0.857025] pci 0000:00:1c.0: pme# supported d0 d3hot d3cold [ 0.857032] pci 0000:00:1c.0: pme# disabled [ 0.857107] pci 0000:00:1c.1: pme# supported d0 d3hot d3cold [ 0.857114] pci 0000:00:1c.1: pme# disabled [ 0.857189] pci 0000:00:1c.3: pme# supported d0 d3hot d3cold [ 0.857195] pci 0000:00:1c.3: pme# disabled [ 0.857251] pci 0000:00:1d.0: reg 20 io port: [0xbc00-0xbc1f] [ 0.857308] pci 0000:00:1d.1: reg 20 io port: [0xb880-0xb89f] [ 0.857364] pci 0000:00:1d.2: reg 20 io port: [0xb800-0xb81f] [ 0.857420] pci 0000:00:1d.3: reg 20 io port: [0xb480-0xb49f] [ 0.857483] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfcffbc00-0xfcffbfff] [ 0.857539] pci 0000:00:1d.7: pme# supported d0 d3hot d3cold [ 0.857547] pci 0000:00:1d.7: pme# disabled [ 0.857728] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.857738] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.857747] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.857757] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.857766] pci 0000:00:1f.2: reg 20 io port: [0xff90-0xff9f] [ 0.857775] pci 0000:00:1f.2: reg 24 32bit mmio: [0x00fc00-0x00ffff] [ 0.857801] pci 0000:00:1f.2: pme# supported d3hot [ 0.857808] pci 0000:00:1f.2: pme# disabled [ 0.857859] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.857939] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.857956] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.857974] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xce000000-0xcfffffff] [ 0.857985] pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f] [ 0.857997] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe980000-0xfe9fffff] [ 0.858097] pci 0000:01:00.1: reg 10 32bit mmio: [0xfe97c000-0xfe97ffff] [ 0.858221] pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff] [ 0.858229] pci 0000:00:1c.0: bridge 32bit mmio: [0xfd000000-0xfe9fffff] [ 0.858239] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xce000000-0xdfffffff] [ 0.858298] pci 0000:02:00.0: reg 10 32bit mmio: [0xfeaffc00-0xfeaffcff] [ 0.858445] pci 0000:02:00.2: reg 10 32bit mmio: [0xfeaff800-0xfeaff8ff] [ 0.858585] pci 0000:02:00.3: reg 10 32bit mmio: [0xfeaff400-0xfeaff4ff] [ 0.858727] pci 0000:02:00.5: reg 10 32bit mmio: [0xfeaf8000-0xfeafbfff] [ 0.858748] pci 0000:02:00.5: reg 18 io port: [0xdc00-0xdc7f] [ 0.858761] pci 0000:02:00.5: reg 1c io port: [0xd800-0xd8ff] [ 0.858826] pci 0000:02:00.5: pme# supported d0 d3hot d3cold [ 0.858834] pci 0000:02:00.5: pme# disabled [ 0.858897] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff] [ 0.858904] pci 0000:00:1c.1: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.858964] pci 0000:03:00.0: reg 10 io port: [0xe800-0xe8ff] [ 0.858976] pci 0000:03:00.0: reg 14 32bit mmio: [0xfebfc000-0xfebfffff] [ 0.859047] pci 0000:03:00.0: supports d1 d2 [ 0.859052] pci 0000:03:00.0: pme# supported d0 d1 d2 d3hot [ 0.859060] pci 0000:03:00.0: pme# disabled [ 0.859119] pci 0000:00:1c.3: bridge io port: [0xe000-0xefff] [ 0.859127] pci 0000:00:1c.3: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.859186] pci 0000:00:1e.0: transparent bridge [ 0.859217] pci_bus 0000:00: on numa node 0 [ 0.859226] acpi: pci interrupt routing table [\_sb_.pci0._prt] [ 0.859422] acpi: pci interrupt routing table [\_sb_.pci0.p0p1._prt] [ 0.859558] acpi: pci interrupt routing table [\_sb_.pci0.p0p4._prt] [ 0.859665] acpi: pci interrupt routing table [\_sb_.pci0.p0p5._prt] [ 0.859808] acpi: pci interrupt routing table [\_sb_.pci0.p0p7._prt] [ 0.877391] acpi: pci interrupt link [lnka] (irqs 3 4 5 7 *10 11 12 14 15) [ 0.877603] acpi: pci interrupt link [lnkb] (irqs 3 4 5 7 10 *11 12 14 15) [ 0.877812] acpi: pci interrupt link [lnkc] (irqs 3 4 5 *7 10 11 12 14 15) [ 0.878020] acpi: pci interrupt link [lnkd] (irqs 3 4 *5 7 10 11 12 14 15) [ 0.878229] acpi: pci interrupt link [lnke] (irqs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.878439] acpi: pci interrupt link [lnkf] (irqs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.878650] acpi: pci interrupt link [lnkg] (irqs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.878862] acpi: pci interrupt link [lnkh] (irqs *3 4 5 7 10 11 12 14 15) [ 0.879111] vgaarb: device added: pci:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.879122] vgaarb: loaded [ 0.879388] scsi subsystem initialized [ 0.879425] libata version 3.00 loaded. [ 0.879425] usbcore: registered new interface driver usbfs [ 0.879425] usbcore: registered new interface driver hub [ 0.880033] usbcore: registered new device driver usb [ 0.880199] acpi: wmi: mapper loaded [ 0.880204] pci: using acpi irq routing [ 0.880304] pci 0000:00:1f.2: bar 5: address space collision on of device [0x00fc00-0x00ffff] [ 0.880310] pci 0000:00:1f.2: bar 5: can't allocate resource [ 0.880519] netlabel: initializing [ 0.880524] netlabel: domain hash size = 128 [ 0.880527] netlabel: protocols = unlabeled cipsov4 [ 0.880550] netlabel: unlabeled traffic allowed default [ 0.880643] hpet0: @ mmio 0xfed00000, irqs 2, 8, 0 [ 0.880654] hpet0: 3 comparators, 64-bit 14.318180 mhz counter [ 0.892117] switching clocksource hpet [ 0.896062] apparmor: apparmor filesystem enabled [ 0.896102] pnp: pnp acpi init [ 0.896139] acpi: bus type pnp registered [ 0.900354] pnp: pnp acpi: found 15 devices [ 0.900360] acpi: acpi bus type pnp unregistered [ 0.900368] pnpbios: disabled acpi pnp [ 0.900395] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.900402] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved [ 0.900421] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.900428] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.900435] system 00:08: ioport range 0x480-0x4bf has been reserved [ 0.900442] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.900450] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.900464] system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved [ 0.900477] system 00:0c: iomem range 0xfec00000-0xfec00fff not reserved [ 0.900484] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.900497] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.900511] system 00:0e: iomem range 0x0-0x9ffff not reserved [ 0.900518] system 00:0e: iomem range 0xc0000-0xcffff not reserved [ 0.900525] system 00:0e: iomem range 0xe0000-0xfffff not reserved [ 0.900532] system 00:0e: iomem range 0x100000-0x7fffffff not reserved [ 0.900539] system 00:0e: iomem range 0xfed90000-0xffffffff not reserved [ 0.935517] pci 0000:00:1c.0: pci bridge, secondary bus 0000:01 [ 0.935525] pci 0000:00:1c.0: io window: 0xc000-0xcfff [ 0.935534] pci 0000:00:1c.0: mem window: 0xfd000000-0xfe9fffff [ 0.935542] pci 0000:00:1c.0: prefetch window: 0x000000ce000000-0x000000dfffffff [ 0.935553] pci 0000:00:1c.1: pci bridge, secondary bus 0000:02 [ 0.935559] pci 0000:00:1c.1: io window: 0xd000-0xdfff [ 0.935568] pci 0000:00:1c.1: mem window: 0xfea00000-0xfeafffff [ 0.935575] pci 0000:00:1c.1: prefetch window: 0x00000080000000-0x000000801fffff [ 0.935586] pci 0000:00:1c.3: pci bridge, secondary bus 0000:03 [ 0.935592] pci 0000:00:1c.3: io window: 0xe000-0xefff [ 0.935600] pci 0000:00:1c.3: mem window: 0xfeb00000-0xfebfffff [ 0.935608] pci 0000:00:1c.3: prefetch window: 0x00000080200000-0x000000803fffff [ 0.935617] pci 0000:00:1e.0: pci bridge, secondary bus 0000:04 [ 0.935622] pci 0000:00:1e.0: io window: disabled [ 0.935629] pci 0000:00:1e.0: mem window: disabled [ 0.935635] pci 0000:00:1e.0: prefetch window: disabled [ 0.935658] alloc irq_desc 16 on node -1 [ 0.935663] alloc kstat_irqs on node -1 [ 0.935675] pci 0000:00:1c.0: pci int -> gsi 16 (level, low) -> irq 16 [ 0.935684] pci 0000:00:1c.0: setting latency timer 64 [ 0.935697] alloc irq_desc 17 on node -1 [ 0.935701] alloc kstat_irqs on node -1 [ 0.935709] pci 0000:00:1c.1: pci int b -> gsi 17 (level, low) -> irq 17 [ 0.935717] pci 0000:00:1c.1: setting latency timer 64 [ 0.935788] pci 0000:00:1c.3: power state changed acpi d0 [ 0.935843] pci 0000:00:1c.3: power state changed acpi d0 [ 0.935854] alloc irq_desc 19 on node -1 [ 0.935858] alloc kstat_irqs on node -1 [ 0.935867] pci 0000:00:1c.3: pci int d -> gsi 19 (level, low) -> irq 19 [ 0.935875] pci 0000:00:1c.3: setting latency timer 64 [ 0.935886] pci 0000:00:1e.0: setting latency timer 64 [ 0.935894] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.935900] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.935907] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.935913] pci_bus 0000:01: resource 1 mem: [0xfd000000-0xfe9fffff] [ 0.935919] pci_bus 0000:01: resource 2 pref mem [0xce000000-0xdfffffff] [ 0.935925] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.935931] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.935937] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff] [ 0.935944] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 0.935949] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.935955] pci_bus 0000:03: resource 2 pref mem [0x80200000-0x803fffff] [ 0.935962] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.935967] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff] [ 0.936067] net: registered protocol family 2 [ 0.936273] ip route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.936909] tcp established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.937855] tcp bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.938282] tcp: hash tables configured (established 131072 bind 65536) [ 0.938288] tcp reno registered [ 0.938505] net: registered protocol family 1 [ 0.938673] pci 0000:01:00.0: boot video device [ 0.939284] cpufreq-nforce2: no nforce2 chipset. [ 0.939339] scanning low memory corruption every 60 seconds [ 0.939566] audit: initializing netlink socket (disabled) [ 0.939586] type=2000 audit(1309455566.936:1): initialized [ 0.956248] highmem bounce pool size: 64 pages [ 0.956261] hugetlb registered 4 mb page size, pre-allocated 0 pages [ 0.959784] vfs: disk quotas dquot_6.5.2 [ 0.959920] dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.961299] fuse init (api version 7.13) [ 0.961495] msgmni has been set 1677 [ 0.962083] alg: no test stdrng (krng) [ 0.962231] block layer scsi generic (bsg) driver version 0.4 loaded (major 253) [ 0.962238] io scheduler noop registered [ 0.962242] io scheduler anticipatory registered [ 0.962247] io scheduler deadline registered [ 0.962343] io scheduler cfq registered (default) [ 0.962587] alloc irq_desc 24 on node -1 [ 0.962592] alloc kstat_irqs on node -1 [ 0.962609] pcieport 0000:00:1c.0: irq 24 msi/msi-x [ 0.962621] pcieport 0000:00:1c.0: setting latency timer 64 [ 0.962794] alloc irq_desc 25 on node -1 [ 0.962799] alloc kstat_irqs on node -1 [ 0.962812] pcieport 0000:00:1c.1: irq 25 msi/msi-x [ 0.962824] pcieport 0000:00:1c.1: setting latency timer 64 [ 0.962996] alloc irq_desc 26 on node -1 [ 0.963000] alloc kstat_irqs on node -1 [ 0.963012] pcieport 0000:00:1c.3: irq 26 msi/msi-x [ 0.963023] pcieport 0000:00:1c.3: setting latency timer 64 [ 0.963176] pci_hotplug: pci hot plug pci core version: 0.5 [ 0.963375] pciehp: pci express hot plug controller driver version: 0.4 [ 0.963577] input: sleep button /devices/lnxsystm:00/lnxsybus:00/pnp0c0e:00/input/input0 [ 0.963585] acpi: sleep button [slpb] [ 0.963682] input: power button /devices/lnxsystm:00/lnxsybus:00/pnp0c0c:00/input/input1 [ 0.963688] acpi: power button [pwrb] [ 0.963788] input: power button /devices/lnxsystm:00/lnxpwrbn:00/input/input2 [ 0.963795] acpi: power button [pwrf] [ 0.965135] processor lnxcpu:00: registered cooling_device0 [ 0.965937] processor lnxcpu:01: registered cooling_device1 [ 0.966729] processor lnxcpu:02: registered cooling_device2 [ 0.967533] processor lnxcpu:03: registered cooling_device3 [ 1.001179] thermal lnxtherm:01: registered thermal_zone0 [ 1.001197] acpi: thermal zone [tz00] (50 c) [ 1.001525] isapnp: scanning pnp cards... [ 1.004889] efifb: probing efifb [ 1.004979] efifb: framebuffer @ 0xcf000000, mapped 0xf8080000, using 1920k, total 1920k [ 1.004986] efifb: mode 800x600x32, linelength=3200, pages=1 [ 1.004990] efifb: scrolling: redraw [ 1.004997] efifb: truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.005113] fb0: efi vga frame buffer device [ 1.005123] serial: 8250/16550 driver, 4 ports, irq sharing enabled [ 1.007982] brd: module loaded [ 1.009117] loop: module loaded [ 1.009315] input: macintosh mouse button emulation /devices/virtual/input/input3 [ 1.009511] ata_piix 0000:00:1f.2: version 2.13 [ 1.009534] ata_piix 0000:00:1f.2: enabling device (0005 -> 0007) [ 1.009546] ata_piix 0000:00:1f.2: pci int b -> gsi 19 (level, low) -> irq 19 [ 1.009555] ata_piix 0000:00:1f.2: map [ p0 p2 p1 p3 ] [ 1.009616] ata_piix 0000:00:1f.2: setting latency timer 64 [ 1.009760] scsi0 : ata_piix [ 1.009953] scsi1 : ata_piix [ 1.012785] ata1: sata max udma/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14 [ 1.012792] ata2: sata max udma/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15 [ 1.013621] fixed mdio bus: probed [ 1.013710] ppp generic driver version 2.4.2 [ 1.013814] tun: universal tun/tap device driver, 1.6 [ 1.013819] tun: (c) 1999-2004 max krasnyansky <maxk@qualcomm.com> [ 1.014009] ehci_hcd: usb 2.0 'enhanced' host controller (ehci) driver [ 1.014050] alloc irq_desc 23 on node -1 [ 1.014055] alloc kstat_irqs on node -1 [ 1.014068] ehci_hcd 0000:00:1d.7: pci int -> gsi 23 (level, low) -> irq 23 [ 1.014096] ehci_hcd 0000:00:1d.7: setting latency timer 64 [ 1.014102] ehci_hcd 0000:00:1d.7: ehci host controller [ 1.014175] ehci_hcd 0000:00:1d.7: new usb bus registered, assigned bus number 1 [ 1.014208] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.014223] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.018128] ehci_hcd 0000:00:1d.7: cache line size of 32 not supported [ 1.018156] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfcffbc00 [ 1.018682] freeing initrd memory: 14441k freed [ 1.033025] ehci_hcd 0000:00:1d.7: usb 2.0 started, ehci 1.00 [ 1.033213] usb usb1: configuration #1 chosen 1 choice [ 1.033277] hub 1-0:1.0: usb hub found [ 1.033295] hub 1-0:1.0: 8 ports detected [ 1.033420] ohci_hcd: usb 1.1 'open' host controller (ohci) driver [ 1.033456] uhci_hcd: usb universal host controller interface driver [ 1.033522] uhci_hcd 0000:00:1d.0: pci int -> gsi 23 (level, low) -> irq 23 [ 1.033535] uhci_hcd 0000:00:1d.0: setting latency timer 64 [ 1.033542] uhci_hcd 0000:00:1d.0: uhci host controller [ 1.033620] uhci_hcd 0000:00:1d.0: new usb bus registered, assigned bus number 2 [ 1.033656] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00 [ 1.033848] usb usb2: configuration #1 chosen 1 choice [ 1.033908] hub 2-0:1.0: usb hub found [ 1.033923] hub 2-0:1.0: 2 ports detected [ 1.034008] uhci_hcd 0000:00:1d.1: pci int b -> gsi 19 (level, low) -> irq 19 [ 1.034023] uhci_hcd 0000:00:1d.1: setting latency timer 64 [ 1.034029] uhci_hcd 0000:00:1d.1: uhci host controller [ 1.034104] uhci_hcd 0000:00:1d.1: new usb bus registered, assigned bus number 3 [ 1.034149] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880 [ 1.034347] usb usb3: configuration #1 chosen 1 choice [ 1.034406] hub 3-0:1.0: usb hub found [ 1.034421] hub 3-0:1.0: 2 ports detected [ 1.034519] alloc irq_desc 18 on node -1 [ 1.034525] alloc kstat_irqs on node -1 [ 1.034536] uhci_hcd 0000:00:1d.2: pci int c -> gsi 18 (level, low) -> irq 18 [ 1.034546] uhci_hcd 0000:00:1d.2: setting latency timer 64 [ 1.034552] uhci_hcd 0000:00:1d.2: uhci host controller [ 1.034624] uhci_hcd 0000:00:1d.2: new usb bus registered, assigned bus number 4 [ 1.034667] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800 [ 1.034857] usb usb4: configuration #1 chosen 1 choice [ 1.034917] hub 4-0:1.0: usb hub found [ 1.034932] hub 4-0:1.0: 2 ports detected [ 1.035015] uhci_hcd 0000:00:1d.3: pci int d -> gsi 16 (level, low) -> irq 16 [ 1.035025] uhci_hcd 0000:00:1d.3: setting latency timer 64 [ 1.035031] uhci_hcd 0000:00:1d.3: uhci host controller [ 1.035110] uhci_hcd 0000:00:1d.3: new usb bus registered, assigned bus number 5 [ 1.035153] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b480 [ 1.035346] usb usb5: configuration #1 chosen 1 choice [ 1.035406] hub 5-0:1.0: usb hub found [ 1.035421] hub 5-0:1.0: 2 ports detected [ 1.035612] pnp: ps/2 controller [pnp0303:ps2k,pnp0f03:ps2m] @ 0x60,0x64 irq 1,12 [ 1.038157] i8042.c: detected active multiplexing controller, rev 1.0. [ 1.038965] serio: i8042 kbd port @ 0x60,0x64 irq 1 [ 1.038980] serio: i8042 aux0 port @ 0x60,0x64 irq 12 [ 1.038991] serio: i8042 aux1 port @ 0x60,0x64 irq 12 [ 1.039001] serio: i8042 aux2 port @ 0x60,0x64 irq 12 [ 1.039011] serio: i8042 aux3 port @ 0x60,0x64 irq 12 [ 1.039266] mice: ps/2 mouse device common mice [ 1.039552] rtc_cmos 00:03: rtc can wake s4 [ 1.039637] rtc_cmos 00:03: rtc core: registered rtc_cmos rtc0 [ 1.039672] rtc0: alarms 1 month, y3k, 114 bytes nvram, hpet irqs [ 1.039932] device-mapper: uevent: version 1.0.3 [ 1.040197] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.040483] device-mapper: multipath: version 1.1.0 loaded [ 1.040491] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.040782] eisa: probing bus 0 @ eisa.0 [ 1.040817] eisa: detected 0 cards. [ 1.040999] input: @ translated set 2 keyboard /devices/platform/i8042/serio0/input/input4 [ 1.042007] cpuidle: using governor ladder [ 1.042013] cpuidle: using governor menu [ 1.043006] tcp cubic registered [ 1.043368] net: registered protocol family 10 [ 1.044381] lo: disabled privacy extensions [ 1.045098] net: registered protocol family 17 [ 1.045220] using ipi no-shortcut mode [ 1.045405] pm: resume disk failed. [ 1.045428] registered taskstats version 1 [ 1.046016] magic number: 15:191:695 [ 1.046074] pci 0000:00:00.0: hash matches [ 1.046143] rtc_cmos 00:03: setting system clock 2011-06-30 17:39:27 utc (1309455567) [ 1.046150] bios edd facility v0.16 2004-jun-25, 0 devices found [ 1.046154] edd information not available. [ 1.233252] ata1.00: ata-8: ocz-vertex2, 1.11, max udma/133 [ 1.233259] ata1.00: 117231408 sectors, multi 16: lba48 ncq (depth 0/32) [ 1.289257] ata1.00: configured udma/133 [ 1.343956] isapnp: no plug & play device found [ 1.344038] usb 1-1: new high speed usb device using ehci_hcd , address 2 [ 1.344212] scsi 0:0:0:0: direct-access ata ocz-vertex2 1.11 pq: 0 ansi: 5 [ 1.344542] sd 0:0:0:0: attached scsi generic sg0 type 0 [ 1.344564] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 gb/55.8 gib) [ 1.344702] sd 0:0:0:0: [sda] write protect off [ 1.344709] sd 0:0:0:0: [sda] mode sense: 00 3a 00 00 [ 1.344776] sd 0:0:0:0: [sda] write cache: enabled, read cache: enabled, doesn't support dpo or fua [ 1.345173] sda: sda1 sda2 < sda5 > [ 1.346327] sd 0:0:0:0: [sda] attached scsi disk [ 1.346363] freeing unused kernel memory: 656k freed [ 1.346883] write protecting kernel text: 4684k [ 1.346958] write protecting kernel read-only data: 1840k [ 1.393231] ramzswap: disk size set 1030628 kb [ 1.404546] udev: starting version 151 [ 1.450843] adding 1030624k swap on /dev/ramzswap0. priority:100 extents:1 across:1030624k ss [ 1.505487] usb 1-1: configuration #1 chosen 1 choice [ 1.561487] linux agpgart interface v0.103 [ 1.575878] console: switching colour frame buffer device 100x37 [ 1.673037] usb 1-5: new high speed usb device using ehci_hcd , address 4 [ 1.809472] usb 1-5: configuration #1 chosen 1 choice [ 1.900487] initializing usb mass storage driver... [ 1.900837] scsi2 : scsi emulation usb mass storage devices [ 1.901070] usb-storage: device found @ 4 [ 1.901076] usb-storage: waiting device settle before scanning [ 1.901114] usbcore: registered new interface driver usb-storage [ 1.901124] usb mass storage support registered. [ 2.160064] usb 3-2: new low speed usb device using uhci_hcd , address 2 [ 2.286051] ext4-fs (sda1): mounted filesystem ordered data mode [ 2.341448] usb 3-2: configuration #1 chosen 1 choice [ 2.584608] usb 5-2: new full speed usb device using uhci_hcd , address 2 [ 2.731230] adding 2438136k swap on /dev/sda5. priority:-1 extents:1 across:2438136k ss [ 2.751045] udev: starting version 151 [ 2.764533] usb 5-2: configuration #1 chosen 1 choice [ 2.824299] lirc_dev: ir remote control driver registered, major 61 [ 2.869265] lirc_mceusb: windows media center edition usb ir transceiver driver lirc 1.90 [ 2.869279] lirc_mceusb: daniel melander <lirc@rajidae.se>, martin blatter <martin_a_blatter@yahoo.com>, dan conti <dconti@acm.wwu.edu> [ 2.932369] jme: jmicron jmc2xx ethernet driver version 1.0.5 [ 2.932467] jme 0000:02:00.5: pci int -> gsi 17 (level, low) -> irq 17 [ 2.932494] jme 0000:02:00.5: setting latency timer 64 [ 2.934967] eth0: jmc260 fast ethernet ver:22 rev:2 macaddr:80:ee:73:07:8b:07 [ 2.935258] sdhci: secure digital host controller interface driver [ 2.935266] sdhci: copyright(c) pierre ossman [ 2.979705] sdhci-pci 0000:02:00.0: sdhci controller found [197b:2382] (rev 80) [ 2.979747] sdhci-pci 0000:02:00.0: pci int b -> gsi 18 (level, low) -> irq 18 [ 2.979842] sdhci-pci 0000:02:00.0: setting latency timer 64 [ 2.979937] registered led device: mmc0:: [ 2.980076] usb 5-2: reset full speed usb device using uhci_hcd , address 2 [ 2.980146] mmc0: sdhci controller on pci [0000:02:00.0] using adma [ 2.980179] sdhci-pci 0000:02:00.2: sdhci controller found [197b:2381] (rev 80) [ 2.980208] sdhci-pci 0000:02:00.2: pci int b -> gsi 18 (level, low) -> irq 18 [ 2.980227] sdhci-pci 0000:02:00.2: refusing bind secondary interface. [ 2.980243] sdhci-pci 0000:02:00.2: pci int b disabled [ 2.995152] vga16fb: initializing [ 2.995162] vga16fb: mapped 0xc00a0000 [ 2.995173] vga16fb: not registering due framebuffer present [ 3.135787] lirc_dev: lirc_register_driver: sample_rate: 0 [ 3.143252] lirc_mceusb[2]: microsoft microsoft ir transceiver on usb5:2 [ 3.216623] nvidia: module license 'nvidia' taints kernel. [ 3.216632] disabling lock debugging due kernel taint [ 3.758305] usbcore: registered new interface driver lirc_mceusb [ 6.025434] jmb38x_ms 0000:02:00.3: pci int b -> gsi 18 (level, low) -> irq 18 [ 6.025451] jmb38x_ms 0000:02:00.3: setting latency timer 64 [ 6.108054] usbcore: registered new interface driver hiddev [ 6.134864] input: ortek wireless touchpad keyboard /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5 [ 6.135099] generic-usb 0003:05a4:1000.0001: input,hidraw0: usb hid v1.10 keyboard [ortek wireless touchpad keyboard] on usb-0000:00:1d.1-2/input0 [ 6.137491] alloc irq_desc 27 on node -1 [ 6.137499] alloc kstat_irqs on node -1 [ 6.137528] jme 0000:02:00.5: irq 27 msi/msi-x [ 6.137874] eth0: link down. [ 6.138485] addrconf(netdev_up): eth0: link not ready [ 6.143661] rtusb init ---> [ 6.144091] === pad = f88ca000, size = 471320 === [ 6.144099] <-- rtmpallocadapterblock, status=0 [ 6.149781] usbcore: registered new interface driver rt2870 [ 6.167457] input: ortek wireless touchpad keyboard /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input6 [ 6.167775] generic-usb 0003:05a4:1000.0002: input,hidraw1: usb hid v1.10 mouse [ortek wireless touchpad keyboard] on usb-0000:00:1d.1-2/input1 [ 6.167846] usbcore: registered new interface driver usbhid [ 6.167855] usbhid: v2.6:usb hid core driver [ 6.186623] lp: driver loaded no devices found [ 6.214558] nvidia 0000:01:00.0: pci int -> gsi 16 (level, low) -> irq 16 [ 6.214581] nvidia 0000:01:00.0: setting latency timer 64 [ 6.214595] vgaarb: device changed decodes: pci:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 6.215345] nvrm: loading nvidia unix x86 kernel module 195.36.24 thu apr 22 09:18:20 pdt 2010 [ 6.305104] usb 1-1: firmware: requesting rt2870.bin [ 6.382386] ndiswrapper version 1.55 loaded (smp=yes, preempt=no) [ 6.545990] hda intel 0000:00:1b.0: pci int -> gsi 16 (level, low) -> irq 16 [ 6.546005] hda_intel: codec_mask forced 0xff [ 6.546091] hda intel 0000:00:1b.0: setting latency timer 64 [ 6.617900] <-- rtmpalloctxrxringmemory, status=0 [ 6.619698] -->rtusbvenderreset [ 6.619828] <--rtusbvenderreset [ 6.901730] usb-storage: device scan complete [ 6.902074] 1. phy mode = 0 [ 6.902080] 2. phy mode = 0 [ 6.902634] scsi 2:0:0:0: direct-access wd ext hdd 1021 2002 pq: 0 ansi: 4 [ 6.904423] sd 2:0:0:0: attached scsi generic sg1 type 0 [ 6.909001] sd 2:0:0:0: [sdb] 3907024896 512-byte logical blocks: (2.00 tb/1.81 tib) [ 6.910242] sd 2:0:0:0: [sdb] test wp failed, assume write enabled [ 6.910251] sd 2:0:0:0: [sdb] assuming drive cache: write through [ 6.912238] sd 2:0:0:0: [sdb] test wp failed, assume write enabled [ 6.912247] sd 2:0:0:0: [sdb] assuming drive cache: write through [ 6.912263] sdb: sdb1 [ 6.934855] rtmpsetphymode: channel out of range, use first channel=1 [ 6.936501] sd 2:0:0:0: [sdb] test wp failed, assume write enabled [ 6.936543] sd 2:0:0:0: [sdb] assuming drive cache: write through [ 6.936555] sd 2:0:0:0: [sdb] attached scsi disk [ 6.943590] 3. phy mode = 0 [ 6.948462] mcs set = 00 00 00 00 00 [ 6.957675] <==== rt28xx_init, status=0 [ 6.959202] 0x1300 = 00073200 [ 6.959890] cfg80211: calling crda update world regulatory domain [ 6.971550] cfg80211: world regulatory domain updated: [ 6.971560] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.971570] (2402000 khz - 2472000 khz @ 40000 khz), (300 mbi, 2000 mbm) [ 6.971578] (2457000 khz - 2482000 khz @ 20000 khz), (300 mbi, 2000 mbm) [ 6.971587] (2474000 khz - 2494000 khz @ 20000 khz), (300 mbi, 2000 mbm) [ 6.971595] (5170000 khz - 5250000 khz @ 40000 khz), (300 mbi, 2000 mbm) [ 6.971603] (5735000 khz - 5835000 khz @ 40000 khz), (300 mbi, 2000 mbm) [ 7.064128] usbcore: registered new interface driver rt2800usb [ 9.589018] alsa hda_intel.c:712: azx_get_response timeout, switching polling mode: last cmd=0x100f0000 [ 10.593014] alsa hda_intel.c:1420: codec #1 probe error; disabling it... [ 11.629016] alsa hda_intel.c:1420: codec #2 probe error; disabling it... [ 12.664515] alsa hda_intel.c:1420: codec #3 probe error; disabling it... [ 12.726493] input: hda digital pcbeep /devices/pci0000:00/0000:00:1b.0/input/input7 [ 12.736667] input: hda intel mic @ ext front jack /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 12.736945] input: hda intel hp out @ ext front jack /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 12.741486] hda intel 0000:01:00.1: pci int b -> gsi 17 (level, low) -> irq 17 [ 12.741502] hda_intel: codec_mask forced 0xf2 [ 12.741604] hda intel 0000:01:00.1: setting latency timer 64 [ 15.792026] alsa hda_intel.c:712: azx_get_response timeout, switching polling mode: last cmd=0x400f0000 [ 16.793037] alsa hda_intel.c:1420: codec #4 probe error; disabling it... [ 17.244016] wlan0: no ipv6 routers present [ 17.829023] alsa hda_intel.c:1420: codec #5 probe error; disabling it... [ 18.872028] alsa hda_intel.c:1420: codec #6 probe error; disabling it... [ 19.912025] alsa hda_intel.c:1420: codec #7 probe error; disabling it... [ 20.155223] usbcore: registered new interface driver ndiswrapper [ 20.950979] cpu0 attaching null sched-domain. [ 20.950996] cpu1 attaching null sched-domain. [ 20.951005] cpu2 attaching null sched-domain. [ 20.951013] cpu3 attaching null sched-domain. [ 20.985538] cpu0 attaching sched-domain: [ 20.985547] domain 0: span 0,2 level sibling [ 20.985553] groups: 0 (cpu_power = 589) 2 (cpu_power = 589) [ 20.985567] domain 1: span 0,2 level mc [ 20.985572] groups: 0,2 (cpu_power = 1178) [ 20.985582] domain 2: span 0-3 level cpu [ 20.985587] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 20.985604] cpu1 attaching sched-domain: [ 20.985609] domain 0: span 1,3 level sibling [ 20.985614] groups: 1 (cpu_power = 589) 3 (cpu_power = 589) [ 20.985626] domain 1: span 1,3 level mc [ 20.985631] groups: 1,3 (cpu_power = 1178) [ 20.985641] domain 2: span 0-3 level cpu [ 20.985646] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 20.985660] cpu2 attaching sched-domain: [ 20.985665] domain 0: span 0,2 level sibling [ 20.985670] groups: 2 (cpu_power = 589) 0 (cpu_power = 589) [ 20.985682] domain 1: span 0,2 level mc [ 20.985687] groups: 0,2 (cpu_power = 1178) [ 20.985696] domain 2: span 0-3 level cpu [ 20.985701] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 20.985714] cpu3 attaching sched-domain: [ 20.985719] domain 0: span 1,3 level sibling [ 20.985725] groups: 3 (cpu_power = 589) 1 (cpu_power = 589) [ 20.985736] domain 1: span 1,3 level mc [ 20.985742] groups: 1,3 (cpu_power = 1178) [ 20.985751] domain 2: span 0-3 level cpu [ 20.985756] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 22.469618] ===>rt_ioctl_giwscan. 1(1) bss returned, data->length = 177 [ 23.318122] hdmi hot plug event: pin=5 presence_detect=1 eld_valid=0 [ 23.344576] hdmi hot plug event: pin=5 presence_detect=1 eld_valid=1 [ 24.120034] hdmi: detected monitor sony tv [ 24.120039] @ connection type hdmi [ 24.120046] hdmi: available speakers: fl/fr [ 24.120054] ------------[ cut here ]------------ [ 24.120066] warning: @ /build/buildd/linux-2.6.32/lib/vsprintf.c:1100 vsnprintf+0x3f2/0x410() [ 24.120072] hardware name: xs35 [ 24.120076] modules linked in: dm_crypt snd_hda_codec_nvhdmi snd_hda_codec_idt rt2800usb rt2800lib rt2x00usb rt2x00lib compat_firmware_class mac80211 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi ndiswrapper snd_seq_midi_event cfg80211 snd_seq rt2870sta snd_timer snd_seq_device usbhid lp snd jmb38x_ms crc_ccitt hid psmouse serio_raw parport nvidia(p) vga16fb memstick sdhci_pci sdhci led_class jme mii soundcore snd_page_alloc vgastate lirc_mceusb lirc_dev usb_storage vesafb intel_agp fbcon tileblit font bitblit softcursor video output agpgart ramzswap xvmalloc lzo_decompress lzo_compress [ 24.120182] pid: 1013, comm: hd-audio1 tainted: p 2.6.32-26-generic #48-ubuntu [ 24.120187] call trace: [ 24.120199] [<c014c7b2>] warn_slowpath_common+0x72/0xa0 [ 24.120206] [<c0353972>] ? vsnprintf+0x3f2/0x410 [ 24.120213] [<c0353972>] ? vsnprintf+0x3f2/0x410 [ 24.120222] [<c014c7fa>] warn_slowpath_null+0x1a/0x20 [ 24.120229] [<c0353972>] vsnprintf+0x3f2/0x410 [ 24.120238] [<c0353a1a>] snprintf+0x1a/0x20 [ 24.120254] [<f8a2a64d>] snd_print_pcm_bits+0x5d/0x80 [snd_hda_codec] [ 24.120271] [<f8a337f7>] hdmi_show_short_audio_desc+0xf7/0x100 [snd_hda_codec] [ 24.120279] [<c0353a1a>] ? snprintf+0x1a/0x20 [ 24.120295] [<f8a3385f>] snd_hdmi_show_eld+0x5f/0xa0 [snd_hda_codec] [ 24.120310] [<f8a33b6c>] ? snd_hdmi_get_eld+0x29c/0x2d0 [snd_hda_codec] [ 24.120325] [<f8a33b6c>] ? snd_hdmi_get_eld+0x29c/0x2d0 [snd_hda_codec] [ 24.120335] [<f8516706>] hdmi_unsol_event+0x106/0x110 [snd_hda_codec_nvhdmi] [ 24.120345] [<c013fb03>] ? finish_task_switch+0x43/0xc0 [ 24.120359] [<f8a2a106>] process_unsol_events+0x56/0x70 [snd_hda_codec] [ 24.120369] [<c0163a3e>] run_workqueue+0x8e/0x150 [ 24.120382] [<f8a2a0b0>] ? process_unsol_events+0x0/0x70 [snd_hda_codec] [ 24.120391] [<c0163b84>] worker_thread+0x84/0xe0 [ 24.120399] [<c0167b00>] ? autoremove_wake_function+0x0/0x50 [ 24.120406] [<c0163b00>] ? worker_thread+0x0/0xe0 [ 24.120413] [<c0167874>] kthread+0x74/0x80 [ 24.120420] [<c0167800>] ? kthread+0x0/0x80 [ 24.120428] [<c0104087>] kernel_thread_helper+0x7/0x10 [ 24.120434] ---[ end trace adeaf3eea0334255 ]--- [ 24.120439] hdmi: supports coding type lpcm: channels = 2, rates = 44100 48000 88200, bits = 16 [ 25.795655] cpu0 attaching null sched-domain. [ 25.795667] cpu1 attaching null sched-domain. [ 25.795673] cpu2 attaching null sched-domain. [ 25.795678] cpu3 attaching null sched-domain. [ 25.820126] cpu0 attaching sched-domain: [ 25.820134] domain 0: span 0,2 level sibling [ 25.820140] groups: 0 (cpu_power = 589) 2 (cpu_power = 589) [ 25.820153] domain 1: span 0,2 level mc [ 25.820159] groups: 0,2 (cpu_power = 1178) [ 25.820168] domain 2: span 0-3 level cpu [ 25.820173] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 25.820187] cpu1 attaching sched-domain: [ 25.820192] domain 0: span 1,3 level sibling [ 25.820197] groups: 1 (cpu_power = 589) 3 (cpu_power = 589) [ 25.820209] domain 1: span 1,3 level mc [ 25.820214] groups: 1,3 (cpu_power = 1178) [ 25.820223] domain 2: span 0-3 level cpu [ 25.820228] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 25.820241] cpu2 attaching sched-domain: [ 25.820246] domain 0: span 0,2 level sibling [ 25.820251] groups: 2 (cpu_power = 589) 0 (cpu_power = 589) [ 25.820263] domain 1: span 0,2 level mc [ 25.820268] groups: 0,2 (cpu_power = 1178) [ 25.820277] domain 2: span 0-3 level cpu [ 25.820282] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 25.820295] cpu3 attaching sched-domain: [ 25.820300] domain 0: span 1,3 level sibling [ 25.820305] groups: 3 (cpu_power = 589) 1 (cpu_power = 589) [ 25.820317] domain 1: span 1,3 level mc [ 25.820322] groups: 1,3 (cpu_power = 1178) [ 25.820331] domain 2: span 0-3 level cpu [ 25.820336] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 28.239137] ===>rt_ioctl_giwscan. 1(1) bss returned, data->length = 177 [ 28.652808] ---> rtmpfreetxrxringmemory [ 28.652867] <--- rtmpfreetxrxringmemory [ 28.934577] <-- rtmpalloctxrxringmemory, status=0 [ 28.936456] -->rtusbvenderreset [ 28.936589] <--rtusbvenderreset [ 29.212829] 1. phy mode = 0 [ 29.212834] 2. phy mode = 0 [ 29.252335] 3. phy mode = 0 [ 29.257211] mcs set = 00 00 00 00 00 [ 29.266467] <==== rt28xx_init, status=0 [ 29.267963] 0x1300 = 00073200 [ 29.568699] ---> rtmpfreetxrxringmemory [ 29.568747] <--- rtmpfreetxrxringmemory [ 29.602653] jme 0000:02:00.5: irq 27 msi/msi-x [ 29.602996] eth0: link down. [ 29.603366] addrconf(netdev_up): eth0: link not ready [ 29.928346] <-- rtmpalloctxrxringmemory, status=0 [ 29.930222] -->rtusbvenderreset [ 29.930332] <--rtusbvenderreset [ 30.221959] 1. phy mode = 0 [ 30.221966] 2. phy mode = 0 [ 30.261456] 3. phy mode = 0 [ 30.266336] mcs set = 00 00 00 00 00 [ 30.275706] <==== rt28xx_init, status=0 [ 30.277339] 0x1300 = 00073200 [ 32.428180] ==>rt_ioctl_siwfreq::siocsiwfreq[cmd=0x8b04] (channel=11) [ 37.515262] ===>rt_ioctl_giwscan. 1(1) bss returned, data->length = 177 [ 37.515521] ==>rt_ioctl_siwfreq::siocsiwfreq[cmd=0x8b04] (channel=1) [ 40.732018] wlan0: no ipv6 routers present [ 300.984661] ---> rtmpfreetxrxringmemory [ 300.984719] <--- rtmpfreetxrxringmemory [ 301.263172] <-- rtmpalloctxrxringmemory, status=0 [ 301.264934] -->rtusbvenderreset [ 301.265061] <--rtusbvenderreset [ 301.550952] 1. phy mode = 0 [ 301.550958] 2. phy mode = 0 [ 301.590474] 3. phy mode = 0 [ 301.595359] mcs set = 00 00 00 00 00 [ 301.604606] <==== rt28xx_init, status=0 [ 301.606103] 0x1300 = 000a4200 [ 301.911025] ---> rtmpfreetxrxringmemory [ 301.911087] <--- rtmpfreetxrxringmemory [ 301.943514] jme 0000:02:00.5: irq 27 msi/msi-x [ 301.943855] eth0: link down. [ 301.944242] addrconf(netdev_up): eth0: link not ready [ 305.854900] <-- rtmpalloctxrxringmemory, status=0 [ 305.856731] -->rtusbvenderreset [ 305.856856] <--rtusbvenderreset [ 306.138745] 1. phy mode = 0 [ 306.138752] 2. phy mode = 0 [ 306.178287] 3. phy mode = 0 [ 306.183151] mcs set = 00 00 00 00 00 [ 306.192398] <==== rt28xx_init, status=0 [ 306.193900] 0x1300 = 000a4200 [ 307.852143] ===>rt_ioctl_giwscan. 1(1) bss returned, data->length = 177 [ 308.286917] ---> rtmpfreetxrxringmemory [ 308.286967] <--- rtmpfreetxrxringmemory [ 308.565947] <-- rtmpalloctxrxringmemory, status=0 [ 308.567707] -->rtusbvenderreset [ 308.567833] <--rtusbvenderreset [ 308.851101] 1. phy mode = 0 [ 308.851108] 2. phy mode = 0 [ 308.890626] 3. phy mode = 0 [ 308.895502] mcs set = 00 00 00 00 00 [ 308.904601] <==== rt28xx_init, status=0 [ 308.906127] 0x1300 = 000a4200 [ 308.998462] jme 0000:02:00.5: irq 27 msi/msi-x [ 308.998816] eth0: link down. [ 308.999191] addrconf(netdev_up): eth0: link not ready [ 309.288432] ---> rtmpfreetxrxringmemory [ 309.288480] <--- rtmpfreetxrxringmemory [ 309.616005] <-- rtmpalloctxrxringmemory, status=0 [ 309.617983] -->rtusbvenderreset [ 309.618112] <--rtusbvenderreset [ 309.901254] 1. phy mode = 0 [ 309.901261] 2. phy mode = 0 [ 309.940776] 3. phy mode = 0 [ 309.945652] mcs set = 00 00 00 00 00 [ 309.954906] <==== rt28xx_init, status=0 [ 309.956413] 0x1300 = 000a4200 [ 312.092491] ==>rt_ioctl_siwfreq::siocsiwfreq[cmd=0x8b04] (channel=11) [ 317.180162] ===>rt_ioctl_giwscan. 1(1) bss returned, data->length = 177 [ 317.180419] ==>rt_ioctl_siwfreq::siocsiwfreq[cmd=0x8b04] (channel=1) [ 320.348019] wlan0: no ipv6 routers present
lsb_release -dcode:wlan0 scan completed : cell 01 - address: 00:22:6b:f7:a0:48 protocol:802.11b/g/n essid:"cliff house" mode:managed channel:11 quality:81/100 signal level:-58 dbm noise level:-71 dbm encryption key:on bit rates:150 mb/s ie: wpa version 1 group cipher : tkip pairwise ciphers (2) : tkip ccmp authentication suites (1) : psk ie: ieee 802.11i/wpa2 version 1 group cipher : tkip pairwise ciphers (2) : tkip ccmp authentication suites (1) : psk
uname -mrcode:description: ubuntu 10.04.1 lts - xbmclive dharma
code:2.6.32-26-generic i686
Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Networking & Wireless [SOLVED] A bit of a head scratcher
Ubuntu
Comments
Post a Comment