Thread: SSD errors

hello,

found laptop unable mount filesystems on vertex 2 ssd. i've attached 2 logs reveal errors like:

code:

ata1.00: status: { drdy err }  ata1.00: error: { unc }

and

code:

acpi error (psargs-0359): [gtf0] namespace lookup failure, ae_not_found  acpi error (psparse-0537): method parse/execution failed [\_sb_.pci0.sat0.prt0._sdd] (node ffff880133a427e0), ae_not_found

the sections of interest begin at:

code:

jun 21 22:44:45 charron kernel: [    1.670805]

upon booting rescue environment, repaired these ext4 filesystems fsck, found many errors. on rebooting, further repair fsck required, system did boot, , seems stable @ present. smart diagnostics shown here:

code:

smartctl 5.40 2010-03-16 r3077 [x86_64-unknown-linux-gnu] (local build)  copyright (c) 2002-10 bruce allen, http://smartmontools.sourceforge.net    === start of information section ===  model family:     ocz vertex ssd  device model:     ocz-vertex2  serial number:    ocz-3owq25np3f33qv35  firmware version: 1.24  user capacity:    90,028,302,336 bytes  device is:        in smartctl database [for details use: -p show]  ata version is:   8  ata standard is:  ata-8-acs revision 6  local time is:    wed jun 22 22:14:23 2011 adt  smart support is: available - device has smart capability.  smart support is: enabled    === start of read smart data section ===  smart overall-health self-assessment test result: passed    general smart values:  offline data collection status:  (0x00)	offline data collection activity  					was never started.  					auto offline data collection: disabled.  self-test execution status:      (   0)	the previous self-test routine completed  					without error or no self-test has ever   					been run.  total time complete offline   data collection: 		 (   0) seconds.  offline data collection  capabilities: 			 (0x7f) smart execute offline immediate.  					auto offline data collection on/off support.  					abort offline collection upon new  					command.  					offline surface scan supported.  					self-test supported.  					conveyance self-test supported.  					selective self-test supported.  smart capabilities:            (0x0003)	saves smart data before entering  					power-saving mode.  					supports smart auto save timer.  error logging capability:        (0x01)	error logging supported.  					general purpose logging supported.  short self-test routine   recommended polling time: 	 (   1) minutes.  extended self-test routine  recommended polling time: 	 (  48) minutes.  conveyance self-test routine  recommended polling time: 	 (   2) minutes.  sct capabilities: 	       (0x003d)	sct status supported.  					sct error recovery control supported.  					sct feature control supported.  					sct data table supported.    smart attributes data structure revision number: 10  vendor specific smart attributes thresholds:  id# attribute_name          flag     value worst thresh type      updated  when_failed raw_value    1 raw_read_error_rate     0x000f   102   100   050    pre-fail        -       5236453    5 reallocated_sector_ct   0x0033   100   100   003    pre-fail        -       0    9 power_on_hours          0x0032   ---   ---   ---    old_age         -       13504606432855549028   12 power_cycle_count       0x0032   ---   ---   ---    old_age         -       38823012  171 unknown_attribute       0x0032   000   000   000    old_age         -       0  172 unknown_attribute       0x0032   000   000   000    old_age         -       0  174 unknown_attribute       0x0030   000   000   000    old_age   offline      -       47  177 wear_leveling_count     0x0000   000   000   000    old_age   offline      -       1  181 program_fail_cnt_total  0x0032   000   000   000    old_age         -       0  182 erase_fail_count_total  0x0032   000   000   000    old_age         -       0  187 reported_uncorrect      0x0032   085   085   000    old_age         -       15  194 temperature_celsius     0x0022   001   129   000    old_age         -       1 (0 127 0 129)  195 program_failure_blk_ct  0x001c   ---   ---   ---    old_age   offline      -       343176209510  196 erase_failure_blk_ct    0x0033   ---   ---   ---    pre-fail        -       25700  231 temperature_celsius     0x0013   100   100   010    pre-fail        -       0  233 media_wearout_indicator 0x0000   000   000   000    old_age   offline      -       2944  234 unknown_attribute       0x0032   000   000   000    old_age         -       1792  241 total_lbas_written      0x0032   000   000   000    old_age         -       1792  242 total_lbas_read         0x0032   000   000   000    old_age         -       3008    error smart error log read failed: input/output error  smartctl: smart error log read failed  error smart error self-test log read failed: input/output error  smartctl: smart self test log read failed  smart selective self-test log data structure revision number 1   span  min_lba  max_lba  current_test_status      1        0        0  not_testing      2        0        0  not_testing      3        0        0  not_testing      4        0        0  not_testing      5        0        0  not_testing  selective self-test flags (0x0):    after scanning selected spans, not read-scan remainder of disk.  if selective self-test pending on power-up, resume after 0 minute delay.

i appreciate digesting logs - if there hardware problem, drive under warranty , i'll seek rma. otherwise, i'd understand cause of these errors - other cause kernel bug, i'd seek resolution for.

luckily, have little of value on ssd, , valuable has been backed on regular basis.

thanks,
-mike

attached files

• logs.tar.gz (35.4 kb, 0 views)

Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Hardware [ubuntu] SSD errors

Ubuntu